VX-030DA Digital Power Amplifier Module 300W

VX-030DA Digital Power Amplifier Module 300W

VX-030DA Digital Power Amplifier Module 300W

VX-030DA

The VX-030DA is an Digital power amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems.It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design. The VX-030DA also features standby mode to be set for reducing standby power consumption. It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.

EN certification

Power Source 31 V DC (operating range: 20 - 33 V DC)
DC power in: M4 screw terminal, distance between barriers: 11 mm (0.43")
Amplification System Class D
Power Consumption 1.3 W (standby mode), 14 W (no audio input)
65 W (1/8 rated output), 375 W (rated output)
at 31 V DC, output voltage selection switch: 100 V
Rated Output Power 300 W (at 100 V line and min. impedance and max. capacitive load)
210 W (at 70 V line and min. impedance and max. capacitive load)
150 W (at 50 V line and min. impedance and max. capacitive load)
(at AC Mains VX-3000DS or VX-3150DS: 187 - 253 V)
Output Voltage 100 V (70 V, 50 V: selectable)
Minimum Impedance Load 33 Ω (at 100 V line), 23 Ω (at 70 V line), 17 Ω (at 50 V line)
Maximum Capacitive Load 0.5 μF
Number of Channels 1
Input DA CONTROL LINK: Nylon connector (15 pins)
Output DA OUTPUT LINK: Nylon connector (2 pins)
Frequency Response 40 Hz - 20 kHz: -5 to +1 dB (at 100 V line, 30 dB (*1) output)
Distortion 1 % or less (at 100 V line, rated output, 1 kHz)
Signal to Noise Ratio 100 dB or more (at 100 V line, A-weighted)
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Surface-treated steel plate
Dimensions 82.8 (W) × 91 (H) × 358.2 (D) mm (3.26" × 3.58" × 14.1")
Weight 1.3 kg (2.87 lb)
Accessory DA CONTROL LINK Cable …1, DA OUTPUT LINK Cable …1, DC FUSE (20 A) …1


Scroll to top