A-9500D2 Dual Channel Digital Mixing Amplifier

A-9500D2 Dual Channel Digital Mixing Amplifier

A-9500D2 Dual Channel Digital Mixing Amplifier

A-9500D2 *AS Model*

TOA’s A-9500D2 designed to be used in conjunction with  optional modules and can be configured up to 8 inputs and 8 ouputs. Combining both the 9000 series modules and existing 900 series input modules, the most appropriate modules can be selected depending on every individual applications.

(*1) 0 dB = 1 V
(*2) Allowing it to be controlled by a control system such as AMX & Creston through RS-232C port.
*AMX and Creston is a trademark of AMX Corporation & Creston Electronics, Inc respectively.

Software version (2.10), Firmware version (2.11)

Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption 220 W
Audio Input Max. 8 channels, modular construction
Speaker Output 1, 2 100V, 500W, 20Ω, M4 screw terminal
Amplification System Class D
Module Slot Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced
Digital input (slot 1 - 4): 24 bit/48 kHz
MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 - 7): 24 bit/48 kHz
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Digital Audio Signal Reference Level -20 dB FS
Frequency Response 20 Hz - 20 kHz, +1, -3 dB
Total Harmonic Distortion 0.3 %
S/N Ratio At Input short, 20 Hz - 20 kHz, ALL FLAT or OFF setting
Output volume min.: 85 dB
Output volume max.: 61 dB (Input 1 volume: 0 dB, Other Inputs: OFF)
Cross Talk Over 60 dB (at 20 kHz)
Tone Control Bass: ±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
Parametric Equalizer 10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB, Q: 0.3 - 5
Speaker Equalizer 10 (PC software has 30 TOA speaker presets)
High-pass Filter -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Low-pass Filter -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only
Scene/Event Memory 32
Auxiliary Function Key lock function
Control Input/Output RS-232C(*2), D-sub connector (9 P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,
                     short-circuit current: under 1 mA, removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC,
                     control current: 50 mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
                     input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
Operating Temperature -10 ℃ to +40 ℃ (14 ゜F to 104 ゜F)
Operating Humidity 35 % to 80 % RH (no condensation)
Finish Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black, paint
Dimensions 420 (W) × 107.6 (H) × 415 (D) mm (16.54" × 4.24" × 16.34")
Weight 9.6 kg (21.16 lb)

Scroll to top