Z-FV200 Series

Z-FV208EV-AS Emergency Message Panel

Z-FV208EV-AS Emergency Message Panel

Z-FV208EV-AS

The Z-FV208EV-AS Emergency Message Panel operates within the section of the Z-FV200 Series Emergency Public Address System. This panel is not required if the system is to be used solely for general-purpose public address applications. It is possible to start and reset emergency broadcasts through automatic or manual operation. The Z-FV208EV-AS comes with 8 pre-recorded emergency messages which alert, evacuation, clear, message 1, message 2, message 3, and message 4.

Z-FV200PP-AS Pre-Amplifier Mixer Panel

Z-FV200PP-AS Pre-Amplifier Mixer Panel

Z-FV200PP-AS *AS Model*

The Z-FV200PP-AS Pre-Amplifier Mixer Panel is the basic operation section of the Z-FV200 Series Emergency Public Address System

Z-FV224PA-AS Power Amplifier

Z-FV224PA-AS Power Amplifier

Z-FV224PA-AS *AS Model*

The Z-FV224PA-AS features 240W rated output with high capacity for audio requirement

Z-FV248PA-AS Power Amplifier

Z-FV248PA-AS Power Amplifier

Z-FV248PA-AS *AS Model*

The Z-FV248PA-AS features 480W rated output with high capacity for audio requirements.

Z-FV200RF-AS Remote Microphone Receiver Panel

Z-FV200RF-AS Remote Microphone Receiver Panel

Z-FV200RF-AS *AS Model*

The Z-FV200RF-AS Microphone Receiver Panel is used to connect the RM-200M Remote Microphone to the Z-FV200 Series Emergency Public Address System. Up to 4 RM-200M can be connected.

Z-FV200CA-AS Amplifier Changeover Panel

Z-FV200CA-AS Amplifier Changeover Panel

Z-FV200CA-AS *AS Model*

The Z-FV200CA-AS Amplifier Changeover Panel is used to automatically changeover Z-FV200 Series fault duty amplifier to working standby amplifier. 1 unit of Z-FV200CA-AS can handle up to 6 nos. of Z-FV200 Series amplifiers.

Z-FV200PS-AS Power Supply Panel

Z-FV200PS-AS Power Supply Panel

Z-FV200PS-AS *AS Model*

The Z-FV200PS-AS Switching DC Power Supply Panel supplies 24V DC power to each component of Z-FV200 Series Voice Evacuation System. In additional, the DC power supply shall connect to an emergency power supply for uninterrupted DC power during AC power failure.

RM-200M Remote Microphone

RM-200M Remote Microphone

RM-200M

The RM-200M Remote Microphone connects to the VM-3240VA, VM-3360VA, VM-2120 and VM-2240 for the purpose of making emergency(*3)/general broadcast announcements.

RM-210 Remote Microphone Extension

RM-210 Remote Microphone Extension

RM-210

The RM-210 is an extension unit for increasing the number of function keys of TOA's Remote Microphones.

WB-RM200 Wall Mount Bracket

WB-RM200 Wall Mount Bracket

WB-RM200

The WB-RM200 is to mount RM-200M, RM-200SA and RM-210 on the wall.

VX-2000DS Emergency Power Supply (301H Version)

VX-2000DS Emergency Power Supply (301H Version)

VX-2000DS 301H

The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the SX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.

VX-2000DS Emergency Power Supply (ER/UK Version)

VX-2000DS Emergency Power Supply (ER/UK Version)

VX-2000DS ER/UK

The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the SX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.

YA-1000A Fault Detection Circuit Module

YA-1000A Fault Detection Circuit Module

YA-1000A

The YA-1000A is installed in a power amplifier to detect the power amplifier's failure. Avoid using the YA-1000A during the power amplifier's parallel operation because it cannot detect a failure correctly.

Scroll to top