IP-A1PG IP Paging Gateway

IP-A1PG IP Paging Gateway

IP-A1PG IP Paging Gateway

IP-A1PG

The IP-A1PG is a PoE-powered Gateway Unit that integrates multiple IP Audio devices by converting the SIP voice or ONVIF Backchannel audio into multicast audio streaming. It can also transmit built-in sound source or input audio as multicast audio streaming. Moreoverm the event broadcasting triggered by control input, scheduler or remote API (HTTP) as well as the command set that sends multiple HTTP commands simultaneously are also available.

Power Source PoE (IEEE802.3af Class 3)
Power Consumption 2.5 W
Audio Transmission Method Multicast Audio Streaming
Audio Codec PCMU (G.711u), PCMA (G.711a), G.722
Audio Delay Time Min. 100 ms (1*)
Network I/F 100BASE-TX, Auto MDI/MDI-X, RJ-45 connector
Network Protocol TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP (RFC3261)
Audio Input 1 channel, electronically-balanced, 10 kΩ
LINE/MIC selectable (Rated input: LINE: 0 dB (2*), MIC: -60 dB (2*)
PAD function (-20 dB (2*), Phantom power ON/OFF (12 V DC), volume adjustable removable terminal block (6 pins)
Monitor Output 1 channel, unbalanced, 600 Ω or less
Rated output: 0 dB (2*), RCA pin jack
Control Input 4 channels, no-voltage make contact inputs, open voltage: 5 V DC, short-circuit current: 2 mA or less, removable terminal block (6 pins)
Mute Control Input 1 channel, 24 V DC cut signal, control current: 5 mA or less, removable terminal block (2 pins)
Control Output 1 channel, open collector output, withstand voltage 30 V DC, control current: 10 mA or less, removable terminal block (6 pins)
Indicator STATUS (green/blue/yellow/red), LINE/MIC IN (green/red), OUTPUT (green), LINK/ACT (green)
Functions  
Broadcasting Audio transmission 
  Transmit internal messages by multicast audio streaming
  Transmit audio from audio input connected devices by multicast audio streaming
Audio conversion
  Convert SIP voice to multicast audio stream and transmit 
  Convert ONVIF Audio Backchannel audio to multicast audio stream and transmit
Scheduler Scheduled broadcasting and control by WEB-UI (Max. schedule settings: 2000)
Configurable actions: Internal message broadcast, audio input broadcast, control output, command set transmission
Event Execute event triggered by control input
Configurable actions: Internal message broadcast, audio input broadcast, command set transmission, broadcast disable, system mute
Internal Messages Max. 20 messages (Max. recording capacity: 80 MB)
Supported file formats
WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
MP3 file: 32/44.1/48 kHz sampling frequency, 64-320 kbps, CBR/VBR, monaural/stereo
Repeat playback: Playcount (1-10 times) or Duration (5-3600 sec)
Interval time: 0-99 sec, Delay time: 0-99 sec
Clock Accuracy ±13 seconds per month
Time Adjustment Manual time setting, Time adjustment by NTP server
Power Outage Protection Period 24 hours (RTC time retention, at 40 °C)
Operating Temperature -30 °C to +55 °C
Operating Humidity 90 %RH or less (no condensation)
Finish Front Case: Surface-treated steel plate, black, paint
Rear Chassis: Surface-treated steel plate
Dimensions 126 (W) x 33 (H) x 80 (D) mm
Weight 390 g
Accessory Removable terminal plug (6 pins, preinstalled on the unit) x 2
Removable terminal plug (2 pins, preinstalled on the unit) x 1
Rubber feet x 4 
Mounting screw (M3 x 6) x 4

(1*) When using Monitor output, assume an audio delay time.
(2*) 0 dB = 1 V
# ONVIF is a registered trademark of ONVIF Inc. 

Computer Requirements
Display Recommended resolution: 1920 x 1080
OS Windows 10 Pro (64-bit edition)
Windows 10 Home (64-bit edition)
Windows 11 Pro
Windows 11 Home
Required Web Browser Google Chrome
Microsoft Edge

# Windows and Microsoft Edge are the registered trademarks of Microsoft Corporation in the United States and other countries.
# Google Chrome is the trademark of Google LLC in United States and other countries.
# Other company names and products are also trademarks of individual companies.

Scroll to top